MHP hydraulic multi-cylinder cone crusher for hard stone
1. Large crushing ratio and high production efficiency. The combination of higher speed and stroke greatly improves the rated power and passing capacity of the HP crusher and improves the crushing ratio and production efficiency.
2. Low consumption of wearing parts, low operating cost, reasonable structure, advanced crushing principle, and technical parameters, reliable operation, and low operating cost; all parts of the crusher are protected against wear, which reduces maintenance costs to a minimum, and is generally used The life span can be increased by more than 30%.
3. The laminated crushing and the finished product have excellent particle shape. The special crushing cavity designed by the principle of inter-particle lamination and the matching speed replaces the traditional single-particle crushing principle to achieve selective crushing of materials, which significantly improves The fine material ratio and cube content of the product greatly reduce the needle-like material.
4. Hydraulic protection and hydraulic cavity clearing, high degree of automation, reduce downtime, hydraulic adjustment of the discharge opening, and overload protection greatly improve the operation level of the cone crusher, making maintenance easier, more convenient to operate, and shorter downtime; The HP series cone crusher bidirectional iron-passing release hydraulic cylinder can allow iron pieces to pass through the crushing chamber. The cone crusher can hydraulically lift the top and automatically discharge the material in the case of iron-over and instantaneous car jams, which greatly reduces the original spring cone. The crusher needs to be shut down for manual discharging, while many other manufacturers' crushers will shut down due to iron jams.
5. A variety of crushing cavity types, flexible application, and strong adaptability. HP cone crusher only needs to replace fixed cone liner and moving cone liner. The shape of the crushing cavity can be from standard super coarse cavity to short head super fine cavity Transformation to meet the requirements of a wide range of product granularity.
Matters needing attention when using:
1. Choose the correct crushing cavity for the material to be crushed;
2. The feed size ratio is appropriate;
3. The feed is evenly distributed within the range of 3600 in the crushing chamber;
4. Automatic control device;
5. The discharge area of the crusher is unobstructed;
6. The specifications of the conveyor belt are compatible with the maximum processing capacity of the crusher;
7. Appropriate selection of the sieve specifications for pre-screening and closed-circuit screening;
The following factors will reduce the production capacity of hydraulic cone crushers
1. The fine material smaller than the discharge opening in the feed exceeds 10% of the production capacity of the crusher;
2. The feed contains viscous materials;
3. Lack of feeding control;
4. The feed material distribution around the crushing cavity is uneven;
5. The recommended power is not used;
6. Insufficient screening capacity of the system;
7. The discharge area of the crusher is not smooth.
Audited Supplier 
){kind=link}
){kind=link}