Cone Crusher Parts Of Bowl Liner And Mantle
Product Introduction of Bowl Liner and Mantle
The bowl liner and mantle are the main components of the cone crusher, and they each have different functions.
The mantle is also known as the moving cone, which is fixed on the cone body with a cone head. The bowl liner and the mantle work together in the cone crusher, and they are the main components for crushing materials. The mantle is fixed, so it is also called the fixed cone. When the cone crusher is in operation, the mantle will move in a trajectory, and the distance from the bowl liner will sometimes get closer and sometimes get farther away, thereby squeezing and crushing the material. Part of the finished material will be discharged from the open-edge discharge port. The bowl liner has a U-shaped screw on the adjustment ring, and zinc alloy is injected between the two to make them tightly combined.
![Cone Crusher Wear Part Standard Bowl Liner Cone Crusher Bowl Liner China](//www.micstatic.com/athena/img/transparent.png)
Material of Bowl Liner and Mantle
The main materials of the bowl linerandmantle are:
(1) High manganese steel (ZGMnl3)
High manganese steel has high tensile strength, plasticity and toughness as well as weak magnetism. Under high speed and heavy load conditions, a work hardening layer will be formed on the working surface, which has good wear resistance. At the same time, it also contains austenite. Even if the parts are worn to a very thin layer, they can still withstand large impact loads without breaking, and will not cause secondary damage to the equipment itself.
(2) Manganese 13 chromium 2 (Mn13Cr2)
Mn13Cr2 material is used. While reducing the C and Mn content of traditional high manganese steel, Cr elements are added to make up for the defect of insufficient toughness of traditional high manganese steel, enhance the wear resistance of the material matrix, and effectively extend the service life of wear-resistant accessories.
(3) Manganese 18 (Mn18)
After years of research and experimentation, the ultra-high manganese steel series products produced by our company have determined the reasonable element ratio and optimized heat treatment process. The manganese content and carbon content in the material are both high. The cast structure of the material is austenite and carbide. After 1050ºC water toughening treatment, most of the carbides are dissolved in austenite.
(4) Manganese 18 Chromium 2 (Mn18Cr2)
Mn18Cr2 material is the product of our MR company's RandD department after years of research and experimentation. The reasonable element ratio and optimized heat treatment process have been determined. The manganese content and carbon content in the material are both high. After composite metamorphism treatment, grain refinement, grain boundary purification, and controlled solidification method during casting, the casting has high hardness, good toughness, impact resistance and wear resistance, and is suitable for use in large and medium-sized cone crushers.
![Cone Crusher Wear Part Standard Bowl Liner Cone Crusher Bowl Liner China](//www.micstatic.com/athena/img/transparent.png)
Chemical Composition of Bowl Liner Mantle:
(the content of ingredients can be adjusted)
|
C |
Si |
Mn |
P |
S |
Cr |
Mn13 |
0.9-1.05 |
0.3-0.9 |
11.0-14.0 |
≤0.060 |
≤0.040 |
- |
Mn13Cr2 |
1.05-1.35 |
0.3-0.9 |
11.0-14.0 |
≤0.060 |
≤0.040 |
1.50-2.50 |
Mn18 |
1.05-1.35 |
0.3-0.9 |
16.0-19.0 |
≤0.060 |
≤0.040 |
- |
Mn18Cr2 |
1.05-1.35 |
0.3-0.9 |
16.0-19.0 |
≤0.060 |
≤0.040 |
1.50-2.50 |
Characteristics of Bowl Liner and Mantle
(1) High cost performance. The use of new composite bowl linerandmantle can reduce the investment cost of casting wear by more than half.
(2) Better quality. The surface is smooth and free of casting defects such as sand sticking, sand inclusion, pores, shrinkage, etc. The internal quality is high and has good resistance to high-load high-cycle impact, friction, extrusion, shearing, etc.
(3) Wide application. The new composite bowl linerandmantle are widely used in crushing iron ore, non-ferrous metal ore, granite, quartzite, pebbles, etc.
(4) Longer service life. The new composite bowl linerandmantle are cast with new composite materials and have a long service life, which is 1-3 times that of ordinary bowl liner.
![Cone Crusher Wear Part Standard Bowl Liner Cone Crusher Bowl Liner China](//www.micstatic.com/athena/img/transparent.png)
Quality Control and Test:
We provide many tests, such as measurement check, metallographic, machinery performance, hardness, ultrasonic inspection, coloring flaw testing, ultrasonic flaw testing, etc,..
![Cone Crusher Wear Part Standard Bowl Liner Cone Crusher Bowl Liner China](//www.micstatic.com/athena/img/transparent.png)
Company Profile
Shanghai Mountain River Machinery Co.,Ltd (MR) is a professional manufacturer of crushing and grinding equipment to process the stones from mountain, river, and mines. In the past few decades, we have been focused on the design, researchanddevelopment, manufacturing, sales, installation, and maintenance of the crushing equipment, grinding equipment, other auxiliary equipment and all their spare parts. Our main products are: Jaw Crusher, Cone Crusher, Impact Crusher, Vertical Impact Crusher, Hammer Crusher, Vibrating Feeder, Vibrating Screen, Sand Washer, Belt Conveyor, Raymond Mill, High Pressure Mill, High Efficiency Mill, Ultrafine Mill, Ball mill and so on. These equipments are widely used in the industry of mining, construction materials, chemicals, metallurgies, transportation, hydraulic engineering and so on. Our business philosophy is: to have the most efficient communication with customers, to choose the most suitable equipment for customers, to produce the best quality equipment for customers, to provide the fastest after-sales service for customers. We have our own production base, with complete modern metal cutting equipment. We are equipped with advanced mechanical design, simulation test system and international first-class production lines and modern test bases. We have our own quality control system and we strictly follow the ISO9001:2008 standard on process of design, production, assembly and inspection.
![Cone Crusher Wear Part Standard Bowl Liner Cone Crusher Bowl Liner China](//www.micstatic.com/athena/img/transparent.png)
Questions and Answers
1.What needs to be poured between the bowl liner and mantle of the cone crusher?
Epoxy resin needs to be poured.
2.What should we pay attention to after replacing the bowl liner?
After the bowl liner is newly installed or replaced, its tightness should be checked and the U-shaped screws should be tightened again after 6-8 hours of work.
3.What should we pay attention to after replacing the mantle?
After the mantle is newly installed or replaced, its tightness should be checked after 6-8 hours of operation. If it is found loose, it should be tightened immediately.
4.What is your company's casting methods?
We support sand casting and lost foam casting.
5.What is the material of your spare parts?
We use different materials for different spare parts. The materials could be high manganese steel, high chromium alloy, etc.
6.What types of main machines spare parts can you provide?
We can offer spare parts especially for crushers, grinding mills, briquette machines, etc.
7.What is the delivery time of your spare parts?
Normally our production time is within 20 working days. And we also have some spare parts in stock, ready for inmediate delivery.
8.My main machines are not purchased from your company, can you still produce the spare parts for me?
Yes, we can produce spare parts strictly according to your technical drawing. If you don´t have the drawing of the spare parts, you can tell us the model/series number/part number of your main machine.